Services Offered
Services
| Engineering |
| NDT Inspection |
| Visual Inspection |
"On behalf of Battlefield Newfoundland I have to forward a huge thank you for your technician's services this year. He has gone beyond the call of duty to help us get through the last couple of months of processing equipment. If more of our vendors were like this it would make our job so much easier."
Robert Simms, Service Administrator
Battlefield Equipment, Mount Pearl Newfoundland
"I have been working with Domson Engineering for over 10 years on various aspects in our high profile projects. Domson has always come to the table with cost effective ideas and solution minded staff that get the job done."
Steve Matthews, G.S.C. / Construction Manager, Structural Steel Division
E.S. Fox Ltd.
"We will be using Domson in the future for any NDT work. The response and work your staff did was excellent. My own Level III guy was very impressed."
Joseph W. Peckan, Manager of Quality Engineering, Safety and Environmental Systems
Welded Tube of Canada
"Domson's NDT testing of the chairlift cable was extremely thorough and professional and would highly recommend their services."
Don Horner
Ski Valley, Minnedosa Manitoba
"Excellent work in an accelerated time period. Thank you for your support."
Steve Watts, Technical Support Manager, Americas
Rolls-Royce Energy, CSB
"Thanks for all your work on designing our challenging lift at Whitby Co-gen. It was good to see a lift go as planned without any unexpected problems."
Gary Epps, Electrical & Power Supply Technician
Whitby Cogeneration L.P.
WELDING ENGINEERING
Welding is a specialized process with many variables affecting weld quality and economy. To consistently ensure the best weld at the lowest cost, welding procedures must be developed and optimized for use.
What Are The Benefits?
- Increase productivity
- Improved quality
- Less re-work
- Access to more work
- Repeatable results
- MORE PROFIT
Structural Steel Fabricators
Structural fabricators / erectors require CWB certification under CSA standard W47.1. For companies opting for division 3, we provide the welding procedure specifications (WPS's) and data sheets (WPDS's) needed for certification. For processes and welding joints that are not pre-approved, we can also prepare and supervise procedure qualification reports (PQR's). For division 2.1 companies, we also provide retained engineer services.
ASME Fabricators
Companies welding on pressure vessels, piping, and other related equipment need to take specific quality control measures according to ASME codes. We can prepare the WPS, weld the test coupons, and provide the approved lab results after testing. We can also supervise welder testing, inspect the finished work and document all fabrication and/or repair welds to meet the requirements of the governing authorities.
Faster Results, Less Cost
Our knowledgeable welding engineers and technologists can quickly supply the solutions you need for a fraction of the cost of developing them in house. Furthermore, you keep your personnel doing chargeable work, reducing downtime during the development phase.
Call us to discuss your individual needs. We will be happy to assist you.